Alcro System Grundolja Trä 1 litre priming oil

Price: £13.50 (Inc. VAT)
Quantity:

Colour Preview Box:

Product Information

System Grundolja Trä is an oil that you use to prime unfinished wood on the exteriors of buildings and windows before painting. You also use System Grundolja oil to prime panel joints, ends of boards and cracks before painting. The oil penetrates the surface deeply, repells water and protects the wood against attack by rot fungi, mould, mildew and blue stain.  Check that all surfaces are dry, clean and free of dust. Brush and sand grey wood to remove it completely before oiling. Lightly sand planed timber first.

Stir the oil well before use. Apply a generous amount of System Grundolja until the wood is saturated. Wipe away excess oil on the surface before it dries. You can paint over the oiled surface with a water-based paint after about 30 minutes. If you are using other kinds of paint, wait 6 to 8 hours before painting.

NOTE: THE PRODUCT CONTAINS LINSEED OIL.
Because System Grundolja Trä contains linseed oil, there is a risk that rags used to wipe off the oil may self-ignite later. You should therefore put used rags, etc., in water or burn them. System Grundolja Trä is for application on unfinished wood only. Any other use of the product is prohibited.

• Available: 1, 3 and 10 litre cans
• Application: Brush
• Solvent: Water
• Sheen Level: Gloss free
• Thinning: Do not thin
• Recoatable: 30 mins for waterboprne paints, 6-8hours other paints
• Coverage: 5-8 m2 per litre

Be the first to review this product!

Product Actions

• Tell a Friend
• Write review / comment

Product Code: SYSV226