Farrow & Ball Wood Floor Primer & Undercoat 2.5 Litre

 
 

£53.00 inc Vat

For use on bare wood or previously painted wood surfaces.

Description

Farrow & Ball Wood Floor Primer & Undercoat

Farrow & Ball wood Floor Primer & Undercoat is a durable primer and undercoat. Use on internal wooden floors only. The product provides good adhesion. Sand to give a a smooth finish. Using the correct coloured wood primer enhances the colour of the topcoat.

  • Available: 750ml and 2.5 litre tins
  • Colours: White & Light Tones, Mid Tones, Red & Warm Tones & Dark Tones.
  • The temperature of the room being painted must stay above 10 ˚C whilst the primer & undercoat is applied and dries.
  • The humidity of the room must remain low during application and drying.
  • If the wood is damp, allow to dry for at least 48 hours before painting. Moisture content should be below 10%.

Surface Preparation

Ensure the interior floor surface is sound, clean, dry and free from dirt, grease and any other contamination. Sand back any sharp edges or places where the grain is raised.

Bare Wooden Floors

Fill any open joins and cracks with a dedicated non flexible wood filler. Ensure the floor is thoroughly clean using an appropriate floor cleaner. Sand to a smooth finish, vacuum and wipe down with a damp cloth. Where required use Farrow & Ball Wood Knot & Resin Blocking Primer to patch prime knotty or resinous woods (Please refer to the Product Advice Sheet for more detailed information). Apply one full coat of Farrow & Ball Wood Floor Primer & Undercoat in the correct colour tone for your top coat to seal. Allow a minimum of four hours drying time between coats.

Painted Wooden Floors.

Areas of old paint that have peeled or blistered need to be removed as per the instructions for bare wood floors. For the best finish and longest service life, remove as much of the previous paint as possible. Ensure the floor is thoroughly clean using an appropriate floor cleaner. Where required use Farrow & Ball Wood Knot & Resin Blocking Primer to patch prime knotty or resinous woods (Please refer to the Product Advice Sheet for more detailed information). Apply one full coat of Farrow & Ball Wood Floor Primer & Undercoat in the correct colour tone for your top coat to seal. Allow a minimum of four hours drying time between coats.

Varnished Floors.

Remove areas where varnish has peeled or blistered. For the best finish and longest service life, as much of the varnish as possible should be removed. Ensure the floor is thoroughly clean using an appropriate floor cleaner.
Where required use Farrow & Ball Wood Knot & Resin Blocking Primer to patch prime knotty or resinous woods (Please refer to the Product Advice Sheet for more detailed information). Apply one full coat of Farrow & Ball Wood Floor Primer & Undercoat in the correct colour tone for your top coat to seal. Allow a minimum of four hours drying time between coats.

Waxed or Polished Floors.

These may not accept Floor Paint.

Heated Floors.

Prior to application, the heating must be switched off for 48 hours to allow the surface area to cool down. Once surface has been painted, allow a further 48 hours before the heating is switched back on.

Application

When using more than one tin of the same colour check that the batch numbers are the same (see the base of the tin). If not then mix the tins together before use. Stir paint thoroughly before use. Apply two coats using a brush or roller. A third coat may be necessary depending on the colour of the top coat and the original surface colour. On application of the final coat lay off the paint in a single direction. Floor Paint is touch dry in two hours. It is re-coatable after four hours. Allow 24 hours for normal use and 14 days before placing or moving heavy items on to the surface. Clean brushes and rollers with warm soapy water.

Additional information

Weight 4.000 kg
Size

Colour

White Light Tones, Mid tones, Red Warm Tones, Dark Tones

SKU: FAR61660. Category: